Product ID:ADHESIVE 9
MSDS Date:03/25/1991
FSC:9150
NIIN:00N038895
MSDS Number: BRHQG

SOUTHWESTERN PETROLEUM CORP

534 NORTH MAIN
FORT WORTH, TX 76106
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 817-332-2336

Cage: 14392

SOUTHWESTERN PETROLEUM CORP

961005 FORT WORTH, TX 76106 US

Telephone: 817-348-7235

Cage: 14392

SILICON DIOXIDE, AMORPHOUS; (DIATOMACEOUS EARTH)

CAS: 7631-86-9

Fraction By Weight: < 3%

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

DUST, NUISANCE; (NUISANCE PARTICULATES)

Fraction By Weight: 10-35%

OSHA PEL 15MG/M3 TDUST,5RDUST

ACGIH TLV: 10 MG/M3

VM & P NAPHTHA

CAS: 64742-89-8

Fraction By Weight: < 6%

OSHA PEL 300 PPM, 400 STEL

ACGIH TLV: 300 PPM

SILICA, CRYSTALLINE - QUARTZ; (CRYSTALLINE SILICA)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <0.5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

OFTEN A SINGLE USE ORGANIC VAPOR RESPIRATOR WITH

RTECS: 9999999ZZ

ASPHALT (PETROLEUM FUMES)

CAS: 8052-42-4

RTECS: CI9900000

Fraction By Weight: 40-70%

ACGIH TLV: 5 MG/M3; (FUME)

HEAVY STRAIGHT RUN NAPHTHA C6-C12; (NAPHTHA)

CAS: 64741-41-9

Fraction By Weight: 30-60%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL: MAY RESULT IN HEADACHE, NASAL
RESPIRATORY IRRITATION, NAUSEA, DROWSINESS, PNEUMONITIS, PULMONARY
EDEMA, CENTRAL NERVOUS SYSTEM DEPRESSION. EYE: IRRITANT. SKIN:
IRRITANT. INGEST: SYMPS FOLLOW TH OSE OF INHALATION. ASPIRATION
HAZARD. SUMMARY ACUTE: EXPOSURE ABOVE PEL MAY RESULT IN SYMPS
LISTED. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE (QUARTZ):
ANTICIPATED TO BE CARCINOGEN,NTP 6TH ANNUAL RPT ON CARC; GROUP
2A,IARC,VOL 7, P.341,1987.
Effects of Overexposure:HLTH HAZ: SUMMARY CHRONIC: NO CHRONIC HAZARDS
ARE EXPECTED FROM NORMAL USE CONDITIONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE TO FRESH AIR, IF BREATHING IS DIFFICULT
ADMINISTER OXYGEN, OBTAIN MEDICAL ATTENTION. EYE: FLUSH W/WATER FOR
AT LEAST 15 MIN, OBTAIN MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND
WATER, IF IRRITATION DEVELOPS OBTAIN MEDICAL ATTENTION. INGEST: DO
NOT INDUCE VOMITING, OBTAIN MEDICAL ATTENTION.

Flash Point Method:PMCC
Flash Point:89.6F,32C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:DRY CHEMICAL, FOAM OR CARBON DIOXIDE.
Fire Fighting Procedures:WATER SHOULD BE USED TO KEEP FIRE EXPOSED
CONTAINERS COOL. WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY BE INEFFECTIVE, WATER OR FOAM
MAY CAUSE FROTHING.

Spill Release Procedures:USE INERT ABSORBENT MATERIAL TO CONFINE SPILLS
AND TO ABSORB MATERIAL INTO A DISPOSABLE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:SPRAY APPLICATION OF THESE PRODS IS NOT EXPECTED TO
PRODUCE SIGNIFICANT AMTS OF THORACIC/RESPIRABLE PARTICLES. A
SIGNIFICANT AMOUNT OF INSPIRABLE PARTICLES MAY BE EXPECTED. SOLVENT
EVAPORATION FROM IN SPIRATED PARTICLES OR FROM (SUPP DATA)

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR TO MEET EXPOSURE
LIMITS.
Ventilation:ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:GLOVES AND PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC: ANY MATL COLLECTING ON A RESPIRATOR MAY CAUSE A SIGNIFICANT
EXPOSURE TO SOLVENTS, POSSIBLY RESULTING IN EXCEEDING THE
APPLICABLE EXPOSURE LIMITS. DURING SPRAY APPLICATION APPROP RESPS
SHLD BE MAINTAINED IN A CNDTN WHICH DOES NOT RESULT IN EXPOSURE TO
SOLVS ABOVE THE APPLICABLE EXPOSURE LIMITS. (ING 7)

Boiling Pt:B.P. Text:280F,138C
Vapor Density:>3
Solubility in Water:NO
Appearance and Odor:BLACK, ODOR CHARACTERISTIC OF VOLATILES.
Percent Volatiles by Volume:30-60

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS (AS RELATED TO GENERAL ORGANIC MATERIALS).
Stability Condition to Avoid:HEAT AND IGNITION SOURCES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:LANDFILL OR INCINERATE AS FEDERAL, STATE AND
LOCAL REGULATIONS PERMIT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.